Difference between revisions of "NitrOS-9 Commands Reference"
From NitrOS-9
(Created page with '== asm == == attr == == backup == == binex == == build == == calldbg == == cmp == == cobbler == == copy == == cputype == == date == == dcheck == == debug == == ded == == deiniz =…') |
|||
(13 intermediate revisions by 2 users not shown) | |||
Line 1: | Line 1: | ||
== asm == | == asm == | ||
+ | |||
+ | {| | ||
+ | |- | ||
+ | | Syntax: | ||
+ | | colspan="2" | asm ''filename'' [option(s)] [#memsize] [>listing] | ||
+ | |- | ||
+ | | Usage: | ||
+ | | colspan="2" | | ||
+ | |- | ||
+ | | Opts: | ||
+ | | colspan="2" | | ||
+ | |- | ||
+ | | | ||
+ | | valign="top" | C | ||
+ | | Conditionals on - displays conditional assembly statements in the listing. (C) | ||
+ | |- | ||
+ | | | ||
+ | | valign="top" | D''num'' | ||
+ | | Page Depth - sets the number of lines per listing page, including heading and blank line. (D66) | ||
+ | |- | ||
+ | | | ||
+ | | valign="top" | E | ||
+ | | Error Message On - displays error messages in listing. When this option is off, an E appears in a statement's informational field if an error is present. (E) | ||
+ | |- | ||
+ | | | ||
+ | | valign="top" | F | ||
+ | | Use Form Feed - uses a form feed for page eject instead of line feeds. (-F) | ||
+ | |- | ||
+ | | | ||
+ | | valign="top" | G | ||
+ | | Generate All Constant Lines -- displays all lines of code generated by pseudo instructions. Otherwise, it displays only the first line. (-G) | ||
+ | |- | ||
+ | | | ||
+ | | valign="top" | L | ||
+ | | Listings On - generates formatted assembly listing. If off, the assembler displays only error messages. (-L) | ||
+ | |- | ||
+ | | | ||
+ | | valign="top" | M | ||
+ | | Mode On - turns on Motorola-compatible mode. (-M) | ||
+ | |- | ||
+ | | | ||
+ | | valign="top" | N | ||
+ | | Narrow Listing - generates listing in a non-columnized, compressed format for better presentation on narrow display devices. (-N) | ||
+ | |- | ||
+ | | | ||
+ | | valign="top" | O[=''filename''] | ||
+ | | Generates object object file. (-O)<br/>If you do not specify a file name, the assembler creates an object file having the same name as the input file in the current execution directory.<br/>If you specify a single name, assembler creates an object file having that name but still in the current execution directory.<br/>If you specify a full pathlist, the assembler uses it as the name specification of the device, directory, and file to create. | ||
+ | |- | ||
+ | | | ||
+ | | valign="top" | S | ||
+ | | Generate Symbol Table -- displays the entire contents of the symbol table at the end of the assembly. Displays each name, its value, and a type code character:<br/><br/>D = data variable (RMB definitions)<br/>E = equate label (EQU)<br/>L = program label<br/>S = set label<br/>U = undefined name.<br/><br/>The table is displayed across the page in alphabetical order. (-S) | ||
+ | |- | ||
+ | | | ||
+ | | valign="top" | W''num'' | ||
+ | | Set Page Width -- defines the maximum length of each listing line. Lines are truncated if they exceed this number. The comment field starts at column 50; therefore, a number smaller than this may cause important parts of the listing to be lost. (W80) | ||
+ | |} | ||
+ | |||
== attr == | == attr == | ||
+ | |||
+ | {| | ||
+ | |- | ||
+ | | Syntax: | ||
+ | | attr filename [<opts>] [<perms>] | ||
+ | |- | ||
+ | | Usage: | ||
+ | | Examine or change the security permissions of a file | ||
+ | |- | ||
+ | | Opts: | ||
+ | | | ||
+ | |- | ||
+ | | align="right" | -perm | ||
+ | | turn off specified permission | ||
+ | |- | ||
+ | | align="right" | perm | ||
+ | | turn on specified permission | ||
+ | |- | ||
+ | | align="right" | -a | ||
+ | | inhibit printing of attrs after change | ||
+ | |- | ||
+ | | Perms: | ||
+ | | | ||
+ | |- | ||
+ | | align="right" | d | ||
+ | | directory file | ||
+ | |- | ||
+ | | align="right" | s | ||
+ | | non-sharable file | ||
+ | |- | ||
+ | | align="right" | r | ||
+ | | read permit to owner | ||
+ | |- | ||
+ | | align="right" | w | ||
+ | | write permit to owner | ||
+ | |- | ||
+ | | align="right" | e | ||
+ | | execute permit to owner | ||
+ | |- | ||
+ | | align="right" | pr | ||
+ | | read permit to public | ||
+ | |- | ||
+ | | align="right" | pw | ||
+ | | write permit to public | ||
+ | |- | ||
+ | | align="right" | pe | ||
+ | | execute permit to public | ||
+ | |} | ||
+ | |||
== backup == | == backup == | ||
+ | |||
+ | {| | ||
+ | |- | ||
+ | | Syntax: | ||
+ | | backup [<opts>] [<srcdev>] [<destdev>] | ||
+ | |- | ||
+ | | Usage: | ||
+ | | Copies all data from one device to another | ||
+ | |- | ||
+ | | Opts: | ||
+ | | | ||
+ | |- | ||
+ | | align="right" | e | ||
+ | | exit if read error occurs | ||
+ | |- | ||
+ | | align="right" | s | ||
+ | | single disk backup | ||
+ | |- | ||
+ | | align="right" | -v | ||
+ | | do not verify writes | ||
+ | |} | ||
+ | |||
== binex == | == binex == | ||
+ | |||
+ | {| | ||
+ | |- | ||
+ | | Syntax: | ||
+ | | binex <path1> <path2> | ||
+ | |- | ||
+ | | Usage: | ||
+ | | Convert binary to S-record format | ||
+ | |} | ||
+ | |||
== build == | == build == | ||
+ | |||
+ | {| | ||
+ | |- | ||
+ | | Syntax: | ||
+ | | build <path> | ||
+ | |- | ||
+ | | Usage: | ||
+ | | Builds short text files from standard input | ||
+ | |} | ||
+ | |||
== calldbg == | == calldbg == | ||
+ | |||
+ | {| | ||
+ | |- | ||
+ | | Syntax: | ||
+ | | | ||
+ | |- | ||
+ | | Usage: | ||
+ | | | ||
+ | |- | ||
+ | | Opts: | ||
+ | | | ||
+ | |} | ||
+ | |||
== cmp == | == cmp == | ||
+ | |||
+ | {| | ||
+ | |- | ||
+ | | Syntax: | ||
+ | | cmp <path1> <path2> | ||
+ | |- | ||
+ | | Usage: | ||
+ | | File comparison utility | ||
+ | |} | ||
+ | |||
== cobbler == | == cobbler == | ||
+ | |||
+ | {| | ||
+ | |- | ||
+ | | Syntax: | ||
+ | | cobbler <devname> | ||
+ | |- | ||
+ | | Usage: | ||
+ | | Creates NitrOS-9 boostrap file from current boot | ||
+ | |} | ||
+ | |||
== copy == | == copy == | ||
+ | |||
+ | {| | ||
+ | |- | ||
+ | | Syntax: | ||
+ | | copy [<opts>] <srcpath> [<dstpath>] [<opts>] | ||
+ | |- | ||
+ | | Usage: | ||
+ | | Copies files | ||
+ | |- | ||
+ | | Opts: | ||
+ | | | ||
+ | |- | ||
+ | |- | ||
+ | | align="right" | -a | ||
+ | | abort on error | ||
+ | |- | ||
+ | | align="right" | -p | ||
+ | | don't print files copied (use with -w) | ||
+ | |- | ||
+ | | align="right" | -r | ||
+ | | rewrite destination | ||
+ | |- | ||
+ | | align="right" | -s | ||
+ | | single drive copy | ||
+ | |- | ||
+ | | align="right" | -v | ||
+ | | verify the copy | ||
+ | |- | ||
+ | | align="right" | -w=<dir> | ||
+ | | copy to <dir> | ||
+ | |- | ||
+ | | align="right" | -x | ||
+ | | copy from execution directory | ||
+ | |} | ||
+ | |||
== cputype == | == cputype == | ||
+ | |||
+ | {| | ||
+ | |- | ||
+ | | Syntax: | ||
+ | | cputype | ||
+ | |- | ||
+ | | Usage: | ||
+ | | Displays type of CPU being used | ||
+ | |} | ||
+ | |||
== date == | == date == | ||
+ | |||
+ | {| | ||
+ | |- | ||
+ | | Syntax: | ||
+ | | date [<opts>] | ||
+ | |- | ||
+ | | Usage: | ||
+ | | Displays current system date | ||
+ | |- | ||
+ | | Opts: | ||
+ | | | ||
+ | |- | ||
+ | | align="right" | -t | ||
+ | | display time also | ||
+ | |} | ||
+ | |||
== dcheck == | == dcheck == | ||
+ | |||
+ | {| | ||
+ | |- | ||
+ | | Syntax: | ||
+ | | dcheck [<opts>] <devname> | ||
+ | |- | ||
+ | | Usage: | ||
+ | | Check disk file structure | ||
+ | |- | ||
+ | | Opts: | ||
+ | | | ||
+ | |- | ||
+ | | align="right" | -w=<path> | ||
+ | | pathlist to directory for work files | ||
+ | |- | ||
+ | | align="right" | -p | ||
+ | | print pathlists for questionable clusters | ||
+ | |- | ||
+ | | align="right" | -m | ||
+ | | save allocation map work files | ||
+ | |- | ||
+ | | align="right" | -b | ||
+ | | suppress listing of unused clusters | ||
+ | |- | ||
+ | | align="right" | -s | ||
+ | | display count of files and directories only | ||
+ | |- | ||
+ | | align="right" | -o | ||
+ | | print options for dcheck | ||
+ | |} | ||
+ | |||
== debug == | == debug == | ||
+ | |||
+ | {| | ||
+ | |- | ||
+ | | Syntax: | ||
+ | | debug | ||
+ | |- | ||
+ | | Usage: | ||
+ | | Interactive debugger | ||
+ | |} | ||
+ | |||
== ded == | == ded == | ||
+ | |||
+ | {| | ||
+ | |- | ||
+ | | Syntax: | ||
+ | | ded </device> | ||
+ | |- | ||
+ | | Usage: | ||
+ | | Binary disk editor | ||
+ | |} | ||
+ | |||
== deiniz == | == deiniz == | ||
+ | |||
+ | {| | ||
+ | |- | ||
+ | | Syntax: | ||
+ | | deiniz <devname> {<devname>} | ||
+ | |- | ||
+ | | Usage: | ||
+ | | Detach one more devices | ||
+ | |} | ||
+ | |||
== del == | == del == | ||
+ | |||
+ | {| | ||
+ | |- | ||
+ | | Syntax: | ||
+ | | del [<opts>] <path> [<path>] [<opts>] | ||
+ | |- | ||
+ | | Usage: | ||
+ | | Deletes one or more files | ||
+ | |- | ||
+ | | Opts: | ||
+ | | | ||
+ | |- | ||
+ | | align="right" | -x | ||
+ | | delete relative to execution directory | ||
+ | |} | ||
+ | |||
== deldir == | == deldir == | ||
+ | |||
+ | {| | ||
+ | |- | ||
+ | | Syntax: | ||
+ | | deldir <path> | ||
+ | |- | ||
+ | | Usage: | ||
+ | | Deletes entire directories | ||
+ | |} | ||
+ | |||
== devs == | == devs == | ||
+ | |||
+ | {| | ||
+ | |- | ||
+ | | Syntax: | ||
+ | | devs | ||
+ | |- | ||
+ | | Usage: | ||
+ | | Displays IOMan's device table entries | ||
+ | |} | ||
+ | |||
== dir == | == dir == | ||
+ | |||
+ | {| | ||
+ | |- | ||
+ | | Syntax: | ||
+ | | dir [<opts>] [<path>] | ||
+ | |- | ||
+ | | Usage: | ||
+ | | Displays formatted list of the file names in a directory | ||
+ | |- | ||
+ | | Opts: | ||
+ | | | ||
+ | |- | ||
+ | | align="right" | -e | ||
+ | | extended directory listing | ||
+ | |- | ||
+ | | align="right" | -x | ||
+ | | execution directory | ||
+ | |} | ||
+ | |||
== dirsort == | == dirsort == | ||
+ | |||
+ | {| | ||
+ | |- | ||
+ | | Syntax: | ||
+ | | | ||
+ | |- | ||
+ | | Usage: | ||
+ | | | ||
+ | |- | ||
+ | | Opts: | ||
+ | | | ||
+ | |} | ||
+ | |||
== disasm == | == disasm == | ||
+ | |||
+ | {| | ||
+ | |- | ||
+ | | Syntax: | ||
+ | | disasm [<opts>] [<pathlist>] | ||
+ | |- | ||
+ | | Usage: | ||
+ | | 6809/6309 disassembler | ||
+ | |- | ||
+ | | Opts: | ||
+ | | | ||
+ | |- | ||
+ | | align="right" | -m | ||
+ | | disassemble module in memory | ||
+ | |- | ||
+ | | align="right" | -o | ||
+ | | display other information | ||
+ | |- | ||
+ | | align="right" | -s$ssss$eeee | ||
+ | | indicate disassembly start and end addresses | ||
+ | |- | ||
+ | | align="right" | -u | ||
+ | | don't convert U/DP offsets to labels | ||
+ | |- | ||
+ | | align="right" | -x | ||
+ | | file is in execution directory | ||
+ | |- | ||
+ | | align="right" | -z | ||
+ | | disassemble from standard input | ||
+ | |} | ||
+ | |||
== display == | == display == | ||
+ | |||
+ | {| | ||
+ | |- | ||
+ | | Syntax: | ||
+ | | display <opts> | ||
+ | |- | ||
+ | | Usage: | ||
+ | | Displays converted characters to standard output | ||
+ | |- | ||
+ | | Opts: | ||
+ | | | ||
+ | |- | ||
+ | | align="right" | xx | ||
+ | | hexademical | ||
+ | |- | ||
+ | | align="right" | .xx | ||
+ | | decimal byte | ||
+ | |- | ||
+ | | align="right" | .Wxx | ||
+ | | decimal word | ||
+ | |- | ||
+ | | align="right" | /xx/ | ||
+ | | string | ||
+ | |- | ||
+ | | align="right" | "xx" | ||
+ | | string | ||
+ | |} | ||
+ | |||
+ | == dmem == | ||
+ | |||
+ | {| | ||
+ | |- | ||
+ | | Syntax: | ||
+ | | dmem [<block> | -<id>] <offset> [<length>] | ||
+ | |- | ||
+ | | Usage: | ||
+ | | Displays raw memory from a block or offset. | ||
+ | | Often piped through 'dump', for example: dmem 0 0 100 ! dump | ||
+ | |} | ||
+ | |||
== dmode == | == dmode == | ||
+ | |||
+ | {| | ||
+ | |- | ||
+ | | Syntax: | ||
+ | | dmode <devname> [<opts>] | ||
+ | |- | ||
+ | | Usage: | ||
+ | | Displays or changes the parameters of an RBF device | ||
+ | |} | ||
+ | |||
== dsave == | == dsave == | ||
+ | |||
+ | {| | ||
+ | |- | ||
+ | | Syntax: | ||
+ | | dsave [<opts>] [<pathlist>] | ||
+ | |- | ||
+ | | Usage: | ||
+ | | Generates procedure file to copy all files from the current directory to <pathlist> | ||
+ | |- | ||
+ | | Opts: | ||
+ | | | ||
+ | |- | ||
+ | | align="right" | -b | ||
+ | | make a system disk by using OS9Boot if present | ||
+ | |- | ||
+ | | align="right" | -b=<path> | ||
+ | | make system disk using <path> as source | ||
+ | |- | ||
+ | | align="right" | -i | ||
+ | | indent for directory levels | ||
+ | |- | ||
+ | | align="right" | -l | ||
+ | | do not process below the current directory level | ||
+ | |- | ||
+ | | align="right" | -m | ||
+ | | do not include makdir commands in procedure file | ||
+ | |- | ||
+ | | align="right" | -r | ||
+ | | force rewrite of file on copy | ||
+ | |- | ||
+ | | align="right" | -s<num> | ||
+ | | set copy size to <num>K | ||
+ | |- | ||
+ | | align="right" | -v | ||
+ | | verify copies | ||
+ | |} | ||
+ | |||
== dump == | == dump == | ||
+ | |||
+ | {| | ||
+ | |- | ||
+ | | Syntax: | ||
+ | | dump [<opts>] [<path>] [<opts>] | ||
+ | |- | ||
+ | | Usage: | ||
+ | | Formatted file dump in hexadecimal and ASCII | ||
+ | |- | ||
+ | | Opts: | ||
+ | | | ||
+ | |- | ||
+ | | align="right" | -h | ||
+ | | no header | ||
+ | |- | ||
+ | | align="right" | -m | ||
+ | | module in memory | ||
+ | |- | ||
+ | | align="right" | -x | ||
+ | | file in execution directory | ||
+ | |} | ||
+ | |||
== echo == | == echo == | ||
+ | |||
+ | {| | ||
+ | |- | ||
+ | | Syntax: | ||
+ | | echo <text> | ||
+ | |- | ||
+ | | Usage: | ||
+ | | Echo entered text to standard output | ||
+ | |} | ||
+ | |||
== edit == | == edit == | ||
+ | |||
+ | {| | ||
+ | |- | ||
+ | | Syntax: | ||
+ | | edit [<path>] | ||
+ | |- | ||
+ | | Usage: | ||
+ | | Standard line-oriented text editor | ||
+ | |} | ||
+ | |||
== error == | == error == | ||
+ | |||
+ | {| | ||
+ | |- | ||
+ | | Syntax: | ||
+ | | error [<errno>] [<errno> [...]] | ||
+ | |- | ||
+ | | Usage: | ||
+ | | Outputs text error messages for given error numbers | ||
+ | |} | ||
+ | |||
== exbin == | == exbin == | ||
+ | |||
+ | {| | ||
+ | |- | ||
+ | | Syntax: | ||
+ | | exbin <path1> <path2> | ||
+ | |- | ||
+ | | Usage: | ||
+ | | Converts S-Record format to binary | ||
+ | |} | ||
+ | |||
== format == | == format == | ||
+ | |||
+ | {| | ||
+ | |- | ||
+ | | Syntax: | ||
+ | | format <devname> [<opts>] | ||
+ | |- | ||
+ | | Usage: | ||
+ | | Initializes a NitrOS-9 diskette | ||
+ | |- | ||
+ | | Opts: | ||
+ | | | ||
+ | |- | ||
+ | | align="right" | R | ||
+ | | Ready | ||
+ | |- | ||
+ | | align="right" | L | ||
+ | | Logical format only | ||
+ | |- | ||
+ | | align="right" | | ||
+ | | "disk name" | ||
+ | |- | ||
+ | | align="right" | 1/2 | ||
+ | | number of sides | ||
+ | |- | ||
+ | | align="right" | | ||
+ | | 'No. of cylinders' (in decimal) | ||
+ | |- | ||
+ | | align="right" | | ||
+ | | :Interleave value: (in decimal) | ||
+ | |- | ||
+ | | align="right" | | ||
+ | | /Cluster size/ (in decimal) | ||
+ | |} | ||
+ | |||
== free == | == free == | ||
+ | |||
+ | {| | ||
+ | |- | ||
+ | | Syntax: | ||
+ | | free [<devname>] | ||
+ | |- | ||
+ | | Usage: | ||
+ | | Displays number of free sectors on device | ||
+ | |} | ||
+ | |||
== grfdrv == | == grfdrv == | ||
+ | |||
+ | {| | ||
+ | |- | ||
+ | | Syntax: | ||
+ | | none | ||
+ | |- | ||
+ | | Usage: | ||
+ | | Graphics driver module that needs to be loaded to handle graphics/windowing commands | ||
+ | |} | ||
+ | |||
== help == | == help == | ||
+ | |||
+ | {| | ||
+ | |- | ||
+ | | Syntax: | ||
+ | | help [<subject>] [<opts>] | ||
+ | |- | ||
+ | | Usage: | ||
+ | | Gives online help to user and prompts if no subjects given | ||
+ | |} | ||
+ | |||
== ident == | == ident == | ||
+ | |||
+ | {| | ||
+ | |- | ||
+ | | Syntax: | ||
+ | | ident [<opts>] <path> [<opts>] | ||
+ | |- | ||
+ | | Usage: | ||
+ | | Displays header information of NitrOS-9 memory modules | ||
+ | |- | ||
+ | | Opts: | ||
+ | | | ||
+ | |- | ||
+ | | align="right" | -m | ||
+ | | module in memory | ||
+ | |- | ||
+ | | align="right" | -s | ||
+ | | short form | ||
+ | |- | ||
+ | | align="right" | -v | ||
+ | | don't verify CRC | ||
+ | |- | ||
+ | | align="right" | -x | ||
+ | | file in execution directory | ||
+ | |} | ||
+ | |||
== iniz == | == iniz == | ||
+ | |||
+ | {| | ||
+ | |- | ||
+ | | Syntax: | ||
+ | | iniz <devname> [<devname> [...]] | ||
+ | |- | ||
+ | | Usage: | ||
+ | | Attaches one or more devices | ||
+ | |} | ||
+ | |||
== irqs == | == irqs == | ||
+ | |||
+ | {| | ||
+ | |- | ||
+ | | Syntax: | ||
+ | | irqs | ||
+ | |- | ||
+ | | Usage: | ||
+ | | Displays interrupt table entries | ||
+ | |} | ||
+ | |||
== link == | == link == | ||
+ | |||
+ | {| | ||
+ | |- | ||
+ | | Syntax: | ||
+ | | link <modname> | ||
+ | |- | ||
+ | | Usage: | ||
+ | | Links to a memory module | ||
+ | |} | ||
+ | |||
== list == | == list == | ||
+ | |||
+ | {| | ||
+ | |- | ||
+ | | Syntax: | ||
+ | | list <path> [<path> [...]] | ||
+ | |- | ||
+ | | Usage: | ||
+ | | Lists the contents of text files | ||
+ | |} | ||
+ | |||
== load == | == load == | ||
+ | |||
+ | {| | ||
+ | |- | ||
+ | | Syntax: | ||
+ | | load <pathlist> [<pathlist> [...]] | ||
+ | |- | ||
+ | | Usage: | ||
+ | | Loads modules into memory | ||
+ | |} | ||
+ | |||
== login == | == login == | ||
+ | |||
+ | {| | ||
+ | |- | ||
+ | | Syntax: | ||
+ | | login | ||
+ | |- | ||
+ | | Usage: | ||
+ | | Timesharing system login | ||
+ | |} | ||
+ | |||
== makdir == | == makdir == | ||
+ | |||
+ | {| | ||
+ | |- | ||
+ | | Syntax: | ||
+ | | makdir <pathlist> | ||
+ | |- | ||
+ | | Usage: | ||
+ | | Creates a new directory file | ||
+ | |} | ||
+ | |||
== megaread == | == megaread == | ||
+ | |||
+ | {| | ||
+ | |- | ||
+ | | Syntax: | ||
+ | | megaread </dev> | ||
+ | |- | ||
+ | | Usage: | ||
+ | | Measures disk performance | ||
+ | |} | ||
+ | |||
== mdir == | == mdir == | ||
+ | |||
+ | {| | ||
+ | |- | ||
+ | | Syntax: | ||
+ | | mdir [<opts>] | ||
+ | |- | ||
+ | | Usage: | ||
+ | | Displays the present memory module directory | ||
+ | |- | ||
+ | | Opts: | ||
+ | | | ||
+ | |- | ||
+ | | align="right" | -e | ||
+ | | prints extended module directory | ||
+ | |} | ||
+ | |||
== merge == | == merge == | ||
+ | |||
+ | {| | ||
+ | |- | ||
+ | | Syntax: | ||
+ | | merge <path> [<path> [...]] | ||
+ | |- | ||
+ | | Usage: | ||
+ | | Copies multiple input files to standard output | ||
+ | |- | ||
+ | | Opts: | ||
+ | | | ||
+ | |- | ||
+ | | align="right" | -z | ||
+ | | gets list of files from standard input | ||
+ | |} | ||
+ | |||
== mfree == | == mfree == | ||
+ | |||
+ | {| | ||
+ | |- | ||
+ | | Syntax: | ||
+ | | mfree | ||
+ | |- | ||
+ | | Usage: | ||
+ | | Displays the amount of free memory | ||
+ | |- | ||
+ | | See also: | ||
+ | | free smap mmap | ||
+ | |} | ||
+ | |||
+ | == mmap == | ||
+ | |||
+ | {| | ||
+ | |- | ||
+ | | Syntax: | ||
+ | | mmap | ||
+ | |- | ||
+ | | Usage: (Level 2) | ||
+ | | Displays the NitrOS-9 memory map. Memory is accessed though the DAT or other memory-mapping hardware. Blocks, typically 8Kbytes in size, are mapped into the processor's 64Kbyte address space. smap shows which of these blocks is allocated and many free blocks are available. | ||
+ | |- | ||
+ | | See also: | ||
+ | | mfree smap | ||
+ | |} | ||
+ | |||
== mpi == | == mpi == | ||
+ | |||
+ | {| | ||
+ | |- | ||
+ | | Syntax: | ||
+ | | mpi | ||
+ | |- | ||
+ | | Usage: | ||
+ | | Displays the presence of a Multi-Pak Interface | ||
+ | |} | ||
+ | |||
== os9gen == | == os9gen == | ||
+ | |||
+ | {| | ||
+ | |- | ||
+ | | Syntax: | ||
+ | | os9gen devnam [<opts>] | ||
+ | |- | ||
+ | | Usage: | ||
+ | | Creates and links a NitrOS-9 bootstrap file | ||
+ | |- | ||
+ | | Opts: | ||
+ | | | ||
+ | |- | ||
+ | | align="right" | -s | ||
+ | | single drive option | ||
+ | |- | ||
+ | | align="right" | -t=<boottrack> | ||
+ | | boot track file to use | ||
+ | |} | ||
+ | |||
== padrom == | == padrom == | ||
+ | |||
+ | {| | ||
+ | |- | ||
+ | | Syntax: | ||
+ | | padrom <padsize> <pathlist> [<devname>] [<opts>] | ||
+ | |- | ||
+ | | Usage: | ||
+ | | Pads a file to <padsize> bytes | ||
+ | |- | ||
+ | | Opts: | ||
+ | | | ||
+ | |- | ||
+ | | align="right" | -c=<char> | ||
+ | | character to pad the file with (in hexadecimal) | ||
+ | |} | ||
+ | |||
== park == | == park == | ||
+ | |||
+ | {| | ||
+ | |- | ||
+ | | Syntax: | ||
+ | | park <devname> [<devname> [...]] | ||
+ | |- | ||
+ | | Usage: | ||
+ | | Parks the heads on a hard disk drive | ||
+ | |} | ||
+ | |||
== printerr == | == printerr == | ||
+ | |||
+ | {| | ||
+ | |- | ||
+ | | Syntax: | ||
+ | | | ||
+ | |- | ||
+ | | Usage: | ||
+ | | | ||
+ | |- | ||
+ | | Opts: | ||
+ | | | ||
+ | |} | ||
+ | |||
+ | == proc == | ||
+ | |||
+ | {| | ||
+ | |- | ||
+ | | Syntax: | ||
+ | | procs [<opts>] | ||
+ | |- | ||
+ | | Usage: (Level 2) | ||
+ | | Displays a list of processes running in the system. Like procs but provides some additional information. | ||
+ | |- | ||
+ | | See also: | ||
+ | | procs | ||
+ | |} | ||
+ | |||
== procs == | == procs == | ||
+ | |||
+ | {| | ||
+ | |- | ||
+ | | Syntax: | ||
+ | | procs [<opts>] | ||
+ | |- | ||
+ | | Usage: | ||
+ | | Displays a list of processes running in the system | ||
+ | |- | ||
+ | | Opts: | ||
+ | | | ||
+ | |- | ||
+ | | align="right" | -e | ||
+ | | displays all processes in the system | ||
+ | |- | ||
+ | | See also: | ||
+ | | proc | ||
+ | |} | ||
+ | |||
== prompt == | == prompt == | ||
+ | |||
+ | {| | ||
+ | |- | ||
+ | | Syntax: | ||
+ | | prompt <message> | ||
+ | |- | ||
+ | | Usage: | ||
+ | | Prints <message> and waits for a key | ||
+ | |} | ||
+ | |||
== pwd == | == pwd == | ||
+ | |||
+ | {| | ||
+ | |- | ||
+ | | Syntax: | ||
+ | | pwd | ||
+ | |- | ||
+ | | Usage: | ||
+ | | Prints the path to the current working directory | ||
+ | |} | ||
+ | |||
== pxd == | == pxd == | ||
+ | |||
+ | {| | ||
+ | |- | ||
+ | | Syntax: | ||
+ | | pxd | ||
+ | |- | ||
+ | | Usage: | ||
+ | | Prints the path to the current execution directory | ||
+ | |- | ||
+ | | Opts: | ||
+ | | | ||
+ | |} | ||
+ | |||
== rename == | == rename == | ||
+ | |||
+ | {| | ||
+ | |- | ||
+ | | Syntax: | ||
+ | | rename <pathlist> <filename> | ||
+ | |- | ||
+ | | Usage: | ||
+ | | Gives the file or directory a new name | ||
+ | |} | ||
+ | |||
== save == | == save == | ||
+ | |||
+ | {| | ||
+ | |- | ||
+ | | Syntax: | ||
+ | | save <path> <modname> [<modname> [...]] | ||
+ | |- | ||
+ | | Usage: | ||
+ | | Saves the memory module(s) to a file | ||
+ | |} | ||
+ | |||
== setime == | == setime == | ||
+ | |||
+ | {| | ||
+ | |- | ||
+ | | Syntax: | ||
+ | | setime [yyyy/mm/dd hh:mm:ss] | ||
+ | |- | ||
+ | | Usage: | ||
+ | | Sets and activates the system clock | ||
+ | |} | ||
+ | |||
== shellplus == | == shellplus == | ||
+ | |||
+ | {| | ||
+ | |- | ||
+ | | Syntax: | ||
+ | | | ||
+ | |- | ||
+ | | Usage: | ||
+ | | | ||
+ | |- | ||
+ | | Opts: | ||
+ | | | ||
+ | |} | ||
+ | |||
== shell == | == shell == | ||
+ | |||
+ | {| | ||
+ | |- | ||
+ | | Syntax: | ||
+ | | shell [<arglist>] | ||
+ | |- | ||
+ | | Usage: | ||
+ | | NitrOS-9 command interpreter | ||
+ | |} | ||
+ | |||
== sleep == | == sleep == | ||
+ | |||
+ | {| | ||
+ | |- | ||
+ | | Syntax: | ||
+ | | sleep <ticks> | ||
+ | |- | ||
+ | | Usage: | ||
+ | | Suspends the current process for a period of time | ||
+ | |} | ||
+ | |||
+ | == smap == | ||
+ | |||
+ | {| | ||
+ | |- | ||
+ | | Syntax: | ||
+ | | smap | ||
+ | |- | ||
+ | | Usage: (Level 2) | ||
+ | | Displays the NitrOS-9 system memory map. Memory within the processor's 64Kbyte address space is allocated in units of 256byte 'pages'. smap shows how these pages are allocated. | ||
+ | |- | ||
+ | | See also: | ||
+ | | mfree mmap | ||
+ | |} | ||
+ | |||
== tee == | == tee == | ||
+ | |||
+ | {| | ||
+ | |- | ||
+ | | Syntax: | ||
+ | | tee [<path>] | ||
+ | |- | ||
+ | | Usage: | ||
+ | | Copy the standard input to multiple output paths | ||
+ | |} | ||
+ | |||
== tmode == | == tmode == | ||
+ | |||
+ | {| | ||
+ | |- | ||
+ | | Syntax: | ||
+ | | tmode [<path>] [<opts>] | ||
+ | |- | ||
+ | | Usage: | ||
+ | | Displays or changes the operating parameters of the terminal | ||
+ | |} | ||
+ | |||
== touch == | == touch == | ||
+ | |||
+ | {| | ||
+ | |- | ||
+ | | Syntax: | ||
+ | | touch [<opts>] <path> [<opts>] | ||
+ | |- | ||
+ | | Usage: | ||
+ | | Updates the date of a file | ||
+ | |- | ||
+ | | Opts: | ||
+ | | | ||
+ | |- | ||
+ | | align="right" | -c | ||
+ | | don't create files | ||
+ | |- | ||
+ | | align="right" | -q | ||
+ | | don't quit on error | ||
+ | |- | ||
+ | | align="right" | -x | ||
+ | | search execution directory | ||
+ | |- | ||
+ | | align="right" | -z | ||
+ | | get files from standard input | ||
+ | |- | ||
+ | | align="right" | -z=<file> | ||
+ | | get files from <file> | ||
+ | |} | ||
+ | |||
== tsmon == | == tsmon == | ||
+ | |||
+ | {| | ||
+ | |- | ||
+ | | Syntax: | ||
+ | | tsmon [<pathlist>] | ||
+ | |- | ||
+ | | Usage: | ||
+ | | Timesharing monitor | ||
+ | |} | ||
+ | |||
== tuneport == | == tuneport == | ||
+ | |||
+ | {| | ||
+ | |- | ||
+ | | Syntax: | ||
+ | | tuneport <device> <value> | ||
+ | |- | ||
+ | | Usage: | ||
+ | | Adjusts the baud value for the serial port | ||
+ | |} | ||
+ | |||
== unlink == | == unlink == | ||
+ | |||
+ | {| | ||
+ | |- | ||
+ | | Syntax: | ||
+ | | unlink <modname> [<modname> [...]] | ||
+ | |- | ||
+ | | Usage: | ||
+ | | Unlinks one or more modules from memory | ||
+ | |} | ||
+ | |||
== verify == | == verify == | ||
+ | |||
+ | {| | ||
+ | |- | ||
+ | | Syntax: | ||
+ | | verify [<opts>] | ||
+ | |- | ||
+ | | Usage: | ||
+ | | Verifies or updates the module header and CRC | ||
+ | |- | ||
+ | | Opts: | ||
+ | | | ||
+ | |- | ||
+ | | align="right" | -u | ||
+ | | update the module CRC | ||
+ | |} | ||
+ | |||
== xmode == | == xmode == | ||
+ | |||
+ | {| | ||
+ | |- | ||
+ | | Syntax: | ||
+ | | xmode <devname> [<opts>] | ||
+ | |- | ||
+ | | Usage: | ||
+ | | Displays or changes the parameters of an SCF device | ||
+ | |} | ||
+ | |||
== inetd == | == inetd == | ||
+ | |||
+ | {| | ||
+ | |- | ||
+ | | Syntax: | ||
+ | | | ||
+ | |- | ||
+ | | Usage: | ||
+ | | | ||
+ | |- | ||
+ | | Opts: | ||
+ | | | ||
+ | |} | ||
+ | |||
== telnet == | == telnet == | ||
+ | |||
+ | {| | ||
+ | |- | ||
+ | | Syntax: | ||
+ | | | ||
+ | |- | ||
+ | | Usage: | ||
+ | | | ||
+ | |- | ||
+ | | Opts: | ||
+ | | | ||
+ | |} | ||
+ | |||
== dw == | == dw == | ||
+ | |||
+ | {| | ||
+ | |- | ||
+ | | Syntax: | ||
+ | | | ||
+ | |- | ||
+ | | Usage: | ||
+ | | | ||
+ | |- | ||
+ | | Opts: | ||
+ | | | ||
+ | |} | ||
+ | |||
== basic09 == | == basic09 == | ||
+ | |||
+ | {| | ||
+ | |- | ||
+ | | Syntax: | ||
+ | | basic09 | ||
+ | |- | ||
+ | | Usage: | ||
+ | | Basic language interpreter | ||
+ | |} | ||
+ | |||
== runb == | == runb == | ||
+ | |||
+ | {| | ||
+ | |- | ||
+ | | Syntax: | ||
+ | | runb <i-code module> | ||
+ | |- | ||
+ | | Usage: | ||
+ | | Basic09 run-time package | ||
+ | |} | ||
+ | |||
== gfx == | == gfx == | ||
+ | |||
+ | {| | ||
+ | |- | ||
+ | | Syntax: | ||
+ | | RUN GFX(<func>,<args>) | ||
+ | |- | ||
+ | | Usage: | ||
+ | | Graphics interface package for Basic09 to do compatible VDG graphics commands | ||
+ | |} | ||
+ | |||
== inkey == | == inkey == | ||
+ | |||
+ | {| | ||
+ | |- | ||
+ | | Syntax: | ||
+ | | RUN INKEY([path], strvar) | ||
+ | |- | ||
+ | | Usage: | ||
+ | | Basic09 subroutine to input a single keystroke | ||
+ | |} | ||
+ | |||
== syscall == | == syscall == | ||
+ | |||
+ | {| | ||
+ | |- | ||
+ | | Syntax: | ||
+ | | | ||
+ | |- | ||
+ | | Usage: | ||
+ | | | ||
+ | |- | ||
+ | | Opts: | ||
+ | | | ||
+ | |} |
Latest revision as of 20:12, 19 May 2017
Contents
- 1 asm
- 2 attr
- 3 backup
- 4 binex
- 5 build
- 6 calldbg
- 7 cmp
- 8 cobbler
- 9 copy
- 10 cputype
- 11 date
- 12 dcheck
- 13 debug
- 14 ded
- 15 deiniz
- 16 del
- 17 deldir
- 18 devs
- 19 dir
- 20 dirsort
- 21 disasm
- 22 display
- 23 dmem
- 24 dmode
- 25 dsave
- 26 dump
- 27 echo
- 28 edit
- 29 error
- 30 exbin
- 31 format
- 32 free
- 33 grfdrv
- 34 help
- 35 ident
- 36 iniz
- 37 irqs
- 38 link
- 39 list
- 40 load
- 41 login
- 42 makdir
- 43 megaread
- 44 mdir
- 45 merge
- 46 mfree
- 47 mmap
- 48 mpi
- 49 os9gen
- 50 padrom
- 51 park
- 52 printerr
- 53 proc
- 54 procs
- 55 prompt
- 56 pwd
- 57 pxd
- 58 rename
- 59 save
- 60 setime
- 61 shellplus
- 62 shell
- 63 sleep
- 64 smap
- 65 tee
- 66 tmode
- 67 touch
- 68 tsmon
- 69 tuneport
- 70 unlink
- 71 verify
- 72 xmode
- 73 inetd
- 74 telnet
- 75 dw
- 76 basic09
- 77 runb
- 78 gfx
- 79 inkey
- 80 syscall
asm
Syntax: | asm filename [option(s)] [#memsize] [>listing] | |
Usage: | ||
Opts: | ||
C | Conditionals on - displays conditional assembly statements in the listing. (C) | |
Dnum | Page Depth - sets the number of lines per listing page, including heading and blank line. (D66) | |
E | Error Message On - displays error messages in listing. When this option is off, an E appears in a statement's informational field if an error is present. (E) | |
F | Use Form Feed - uses a form feed for page eject instead of line feeds. (-F) | |
G | Generate All Constant Lines -- displays all lines of code generated by pseudo instructions. Otherwise, it displays only the first line. (-G) | |
L | Listings On - generates formatted assembly listing. If off, the assembler displays only error messages. (-L) | |
M | Mode On - turns on Motorola-compatible mode. (-M) | |
N | Narrow Listing - generates listing in a non-columnized, compressed format for better presentation on narrow display devices. (-N) | |
O[=filename] | Generates object object file. (-O) If you do not specify a file name, the assembler creates an object file having the same name as the input file in the current execution directory. If you specify a single name, assembler creates an object file having that name but still in the current execution directory. If you specify a full pathlist, the assembler uses it as the name specification of the device, directory, and file to create. | |
S | Generate Symbol Table -- displays the entire contents of the symbol table at the end of the assembly. Displays each name, its value, and a type code character: D = data variable (RMB definitions) E = equate label (EQU) L = program label S = set label U = undefined name. The table is displayed across the page in alphabetical order. (-S) | |
Wnum | Set Page Width -- defines the maximum length of each listing line. Lines are truncated if they exceed this number. The comment field starts at column 50; therefore, a number smaller than this may cause important parts of the listing to be lost. (W80) |
attr
Syntax: | attr filename [<opts>] [<perms>] |
Usage: | Examine or change the security permissions of a file |
Opts: | |
-perm | turn off specified permission |
perm | turn on specified permission |
-a | inhibit printing of attrs after change |
Perms: | |
d | directory file |
s | non-sharable file |
r | read permit to owner |
w | write permit to owner |
e | execute permit to owner |
pr | read permit to public |
pw | write permit to public |
pe | execute permit to public |
backup
Syntax: | backup [<opts>] [<srcdev>] [<destdev>] |
Usage: | Copies all data from one device to another |
Opts: | |
e | exit if read error occurs |
s | single disk backup |
-v | do not verify writes |
binex
Syntax: | binex <path1> <path2> |
Usage: | Convert binary to S-record format |
build
Syntax: | build <path> |
Usage: | Builds short text files from standard input |
calldbg
Syntax: | |
Usage: | |
Opts: |
cmp
Syntax: | cmp <path1> <path2> |
Usage: | File comparison utility |
cobbler
Syntax: | cobbler <devname> |
Usage: | Creates NitrOS-9 boostrap file from current boot |
copy
Syntax: | copy [<opts>] <srcpath> [<dstpath>] [<opts>] |
Usage: | Copies files |
Opts: | |
-a | abort on error |
-p | don't print files copied (use with -w) |
-r | rewrite destination |
-s | single drive copy |
-v | verify the copy |
-w=<dir> | copy to <dir> |
-x | copy from execution directory |
cputype
Syntax: | cputype |
Usage: | Displays type of CPU being used |
date
Syntax: | date [<opts>] |
Usage: | Displays current system date |
Opts: | |
-t | display time also |
dcheck
Syntax: | dcheck [<opts>] <devname> |
Usage: | Check disk file structure |
Opts: | |
-w=<path> | pathlist to directory for work files |
-p | print pathlists for questionable clusters |
-m | save allocation map work files |
-b | suppress listing of unused clusters |
-s | display count of files and directories only |
-o | print options for dcheck |
debug
Syntax: | debug |
Usage: | Interactive debugger |
ded
Syntax: | ded </device> |
Usage: | Binary disk editor |
deiniz
Syntax: | deiniz <devname> {<devname>} |
Usage: | Detach one more devices |
del
Syntax: | del [<opts>] <path> [<path>] [<opts>] |
Usage: | Deletes one or more files |
Opts: | |
-x | delete relative to execution directory |
deldir
Syntax: | deldir <path> |
Usage: | Deletes entire directories |
devs
Syntax: | devs |
Usage: | Displays IOMan's device table entries |
dir
Syntax: | dir [<opts>] [<path>] |
Usage: | Displays formatted list of the file names in a directory |
Opts: | |
-e | extended directory listing |
-x | execution directory |
dirsort
Syntax: | |
Usage: | |
Opts: |
disasm
Syntax: | disasm [<opts>] [<pathlist>] |
Usage: | 6809/6309 disassembler |
Opts: | |
-m | disassemble module in memory |
-o | display other information |
-s$ssss$eeee | indicate disassembly start and end addresses |
-u | don't convert U/DP offsets to labels |
-x | file is in execution directory |
-z | disassemble from standard input |
display
Syntax: | display <opts> |
Usage: | Displays converted characters to standard output |
Opts: | |
xx | hexademical |
.xx | decimal byte |
.Wxx | decimal word |
/xx/ | string |
"xx" | string |
dmem
Syntax: | -<id>] <offset> [<length>] | |
Usage: | Displays raw memory from a block or offset. | Often piped through 'dump', for example: dmem 0 0 100 ! dump |
dmode
Syntax: | dmode <devname> [<opts>] |
Usage: | Displays or changes the parameters of an RBF device |
dsave
Syntax: | dsave [<opts>] [<pathlist>] |
Usage: | Generates procedure file to copy all files from the current directory to <pathlist> |
Opts: | |
-b | make a system disk by using OS9Boot if present |
-b=<path> | make system disk using <path> as source |
-i | indent for directory levels |
-l | do not process below the current directory level |
-m | do not include makdir commands in procedure file |
-r | force rewrite of file on copy |
-s<num> | set copy size to <num>K |
-v | verify copies |
dump
Syntax: | dump [<opts>] [<path>] [<opts>] |
Usage: | Formatted file dump in hexadecimal and ASCII |
Opts: | |
-h | no header |
-m | module in memory |
-x | file in execution directory |
echo
Syntax: | echo <text> |
Usage: | Echo entered text to standard output |
edit
Syntax: | edit [<path>] |
Usage: | Standard line-oriented text editor |
error
Syntax: | error [<errno>] [<errno> [...]] |
Usage: | Outputs text error messages for given error numbers |
exbin
Syntax: | exbin <path1> <path2> |
Usage: | Converts S-Record format to binary |
format
Syntax: | format <devname> [<opts>] |
Usage: | Initializes a NitrOS-9 diskette |
Opts: | |
R | Ready |
L | Logical format only |
"disk name" | |
1/2 | number of sides |
'No. of cylinders' (in decimal) | |
:Interleave value: (in decimal) | |
/Cluster size/ (in decimal) |
free
Syntax: | free [<devname>] |
Usage: | Displays number of free sectors on device |
grfdrv
Syntax: | none |
Usage: | Graphics driver module that needs to be loaded to handle graphics/windowing commands |
help
Syntax: | help [<subject>] [<opts>] |
Usage: | Gives online help to user and prompts if no subjects given |
ident
Syntax: | ident [<opts>] <path> [<opts>] |
Usage: | Displays header information of NitrOS-9 memory modules |
Opts: | |
-m | module in memory |
-s | short form |
-v | don't verify CRC |
-x | file in execution directory |
iniz
Syntax: | iniz <devname> [<devname> [...]] |
Usage: | Attaches one or more devices |
irqs
Syntax: | irqs |
Usage: | Displays interrupt table entries |
link
Syntax: | link <modname> |
Usage: | Links to a memory module |
list
Syntax: | list <path> [<path> [...]] |
Usage: | Lists the contents of text files |
load
Syntax: | load <pathlist> [<pathlist> [...]] |
Usage: | Loads modules into memory |
login
Syntax: | login |
Usage: | Timesharing system login |
makdir
Syntax: | makdir <pathlist> |
Usage: | Creates a new directory file |
megaread
Syntax: | megaread </dev> |
Usage: | Measures disk performance |
mdir
Syntax: | mdir [<opts>] |
Usage: | Displays the present memory module directory |
Opts: | |
-e | prints extended module directory |
merge
Syntax: | merge <path> [<path> [...]] |
Usage: | Copies multiple input files to standard output |
Opts: | |
-z | gets list of files from standard input |
mfree
Syntax: | mfree |
Usage: | Displays the amount of free memory |
See also: | free smap mmap |
mmap
Syntax: | mmap |
Usage: (Level 2) | Displays the NitrOS-9 memory map. Memory is accessed though the DAT or other memory-mapping hardware. Blocks, typically 8Kbytes in size, are mapped into the processor's 64Kbyte address space. smap shows which of these blocks is allocated and many free blocks are available. |
See also: | mfree smap |
mpi
Syntax: | mpi |
Usage: | Displays the presence of a Multi-Pak Interface |
os9gen
Syntax: | os9gen devnam [<opts>] |
Usage: | Creates and links a NitrOS-9 bootstrap file |
Opts: | |
-s | single drive option |
-t=<boottrack> | boot track file to use |
padrom
Syntax: | padrom <padsize> <pathlist> [<devname>] [<opts>] |
Usage: | Pads a file to <padsize> bytes |
Opts: | |
-c=<char> | character to pad the file with (in hexadecimal) |
park
Syntax: | park <devname> [<devname> [...]] |
Usage: | Parks the heads on a hard disk drive |
printerr
Syntax: | |
Usage: | |
Opts: |
proc
Syntax: | procs [<opts>] |
Usage: (Level 2) | Displays a list of processes running in the system. Like procs but provides some additional information. |
See also: | procs |
procs
Syntax: | procs [<opts>] |
Usage: | Displays a list of processes running in the system |
Opts: | |
-e | displays all processes in the system |
See also: | proc |
prompt
Syntax: | prompt <message> |
Usage: | Prints <message> and waits for a key |
pwd
Syntax: | pwd |
Usage: | Prints the path to the current working directory |
pxd
Syntax: | pxd |
Usage: | Prints the path to the current execution directory |
Opts: |
rename
Syntax: | rename <pathlist> <filename> |
Usage: | Gives the file or directory a new name |
save
Syntax: | save <path> <modname> [<modname> [...]] |
Usage: | Saves the memory module(s) to a file |
setime
Syntax: | setime [yyyy/mm/dd hh:mm:ss] |
Usage: | Sets and activates the system clock |
shellplus
Syntax: | |
Usage: | |
Opts: |
shell
Syntax: | shell [<arglist>] |
Usage: | NitrOS-9 command interpreter |
sleep
Syntax: | sleep <ticks> |
Usage: | Suspends the current process for a period of time |
smap
Syntax: | smap |
Usage: (Level 2) | Displays the NitrOS-9 system memory map. Memory within the processor's 64Kbyte address space is allocated in units of 256byte 'pages'. smap shows how these pages are allocated. |
See also: | mfree mmap |
tee
Syntax: | tee [<path>] |
Usage: | Copy the standard input to multiple output paths |
tmode
Syntax: | tmode [<path>] [<opts>] |
Usage: | Displays or changes the operating parameters of the terminal |
touch
Syntax: | touch [<opts>] <path> [<opts>] |
Usage: | Updates the date of a file |
Opts: | |
-c | don't create files |
-q | don't quit on error |
-x | search execution directory |
-z | get files from standard input |
-z=<file> | get files from <file> |
tsmon
Syntax: | tsmon [<pathlist>] |
Usage: | Timesharing monitor |
tuneport
Syntax: | tuneport <device> <value> |
Usage: | Adjusts the baud value for the serial port |
unlink
Syntax: | unlink <modname> [<modname> [...]] |
Usage: | Unlinks one or more modules from memory |
verify
Syntax: | verify [<opts>] |
Usage: | Verifies or updates the module header and CRC |
Opts: | |
-u | update the module CRC |
xmode
Syntax: | xmode <devname> [<opts>] |
Usage: | Displays or changes the parameters of an SCF device |
inetd
Syntax: | |
Usage: | |
Opts: |
telnet
Syntax: | |
Usage: | |
Opts: |
dw
Syntax: | |
Usage: | |
Opts: |
basic09
Syntax: | basic09 |
Usage: | Basic language interpreter |
runb
Syntax: | runb <i-code module> |
Usage: | Basic09 run-time package |
gfx
Syntax: | RUN GFX(<func>,<args>) |
Usage: | Graphics interface package for Basic09 to do compatible VDG graphics commands |
inkey
Syntax: | RUN INKEY([path], strvar) |
Usage: | Basic09 subroutine to input a single keystroke |
syscall
Syntax: | |
Usage: | |
Opts: |