Difference between revisions of "Building NitrOS9"
(→Obtain and build NitrOS-9: adding note about how to find what PORTS can be built) |
(→Obtain and build the Toolshed tools: adding example error message for searchers) |
||
Line 44: | Line 44: | ||
cd .. | cd .. | ||
</pre> | </pre> | ||
− | This will build and install the toolshed tools into your /usr/local/bin directory. | + | This will build and install the toolshed tools into your /usr/local/bin directory. On Linux/Mac OS X systems, if the build fails with an error similar to: |
+ | ... | ||
+ | install -m 0644 doc/ToolShed.html /usr/local/share/toolshed | ||
+ | install: /usr/local/share/toolshed/ToolShed.html: Permission denied | ||
+ | make: *** [install] Error 71 | ||
+ | ...use "'''sudo''' make -C build/unix install" if needed. | ||
== Verify your build environment == | == Verify your build environment == |
Revision as of 17:02, 4 July 2022
Note: To build NitrOS-9 version 3.3.0 or older, use LWTOOLS 4.11. To build from hg repo use the latest LWTOOLS release.
The LWTOOLS and ToolShed utilities are used to build the NitrOS-9 operating system on Mac, Windows, or Linux based systems. If you would like to set up your system to build the project, please follow the instructions below.
Contents
Notes about spaces in directory paths
Directory/folder names with spaces in them will prevent the build scripts from working. This can happen on Windows if using OneDrive or Mac OS X if using iCloud Drive. Building out of a directory located in either will have spaces in the path name ("/Users/username/Library/Mobile Documents/com~apple~CloudDocs/" for example).
The error messages may be confusing. In this case, the space in "Mobile Documents" causes the build to fail, and the error reports it cannot find a directory called "Mobile":
make: *** /Users/username/Library/Mobile: No such file or directory. Stop. make: *** [all] Error 2
Move the source code to a path without spaces (outside of the shared folders). You can then build it there, or make a shortcut/link/alias to that location where you want it.
Notes for Linux platforms
For Debian/Ubuntu you can get prebuilt LWTOOLS and Toolshed from https://launchpad.net/~tormodvolden/+archive/m6809 Other packages needed are: mercurial, make, zip
Notes for Windows platforms
For Windows you can get prebuilt LWTOOLS from http://lwtools.projects.l-w.ca/contrib/tormod/ and prebuilt Toolshed from https://sourceforge.net/projects/toolshed/files/ToolShed/
Mercurial (hg) can be installed from http://mercurial.selenic.com/wiki/Download for instance by downloading the Mercurial MSI installer (ca 6 MB).
The build process must be done in a Cygwin or MingW environment.
On MingW you will have to append "CC=gcc" to the "make" lines below. See also Building NitrOS9 in Windows using Cygwin or Building NitrOS9 in Windows using MinGW for more Windows specific issues.
Obtain and build LWTOOLS
hg clone http://lwtools.projects.l-w.ca/hg/ lwtools cd lwtools make make install cd ..
This will build and install lwasm, lwlink, lwar and lwobjdump into your /usr/local/bin directory. If "make install" fails on unsufficient permissions, run "sudo make install".
Obtain and build the Toolshed tools
hg clone http://hg.code.sf.net/p/toolshed/code toolshed cd toolshed make -C build/unix install cd ..
This will build and install the toolshed tools into your /usr/local/bin directory. On Linux/Mac OS X systems, if the build fails with an error similar to:
... install -m 0644 doc/ToolShed.html /usr/local/share/toolshed install: /usr/local/share/toolshed/ToolShed.html: Permission denied make: *** [install] Error 71
...use "sudo make -C build/unix install" if needed.
Verify your build environment
Before trying to build NitrOS-9 verify that all above components are correctly installed:
- Typing
lwasm -V
should display the LWOOLS version - Typing
os9
should display the ToolShed version (and usage instructions) - Typing
hg --version
should display the mercurial version
If a command above is not found, make sure that it is in your path, either by editing your shell startup scripts or by entering PATH=$PATH:/usr/local/bin
in your active command shell.
Obtain and build NitrOS-9
The very first time you will need to clone the NitrOS-9 repository:
hg clone http://hg.code.sf.net/p/nitros9/code nitros9 cd nitros9
At this point you are ready to rock. To build all of NitrOS-9 including things you almost certainly don't want:
make dsk
Alternatively you can first change to the directory containing the system you would like to build, for instance:
export NITROS9DIR=$PWD cd level2/coco3 make dsk
Or just stay in the top folder and specify a "port" (coco2, coco3, coco3_6309, etc):
make dsk PORTS=coco3
You should now find disk images have been created in the various directories. For instance, the boot disks for level 2, 6309 can be found in the level2/coco3_6309 subdirectory.
To find a list of available "PORTS=" targets, look in the makefile located in nitros9/level1, nitros9/level2 and nitros9/level3 for the line "dirs = xxx xxx xxx". Those items are ports that can be built this way.
Updating your build
If you later want to update your NitrOS-9 build, pull the latest repository changes and update your tree, and build again:
hg pull hg update make dsk
Updating an old repo clone (2013 or earlier)
At a point in development the "lwtools" branch was used, so if updating from a repo from that time, run this command once to change your current branch to the "default" branch:
hg update default